Thule's Traverse Short Roof Adapter enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It's designed for use with the Traverse Foot System and Rapid Aero or square crossbars.
Yakima's HighLoader is a premium upright bike mount that accommodates nearly any bicycle, from sleek road bikes to 29ers with up to 3-inch-wide tires. It makes no contact with the bike frame itself, so it works great with disc brakes, full-suspension rigs and through-axles, and it's nice and easy to mount your bikes. It's also compatible with round or square crossbars, as well as factory and aerodynamic bars with Yakima's Mighty Mounts (sold separately). And it includes a dual-purpose, integrated cable lock that secures the bike to the rack, as well as the rack to the car so your stuff stays safe.
Yakima's SprocketRocket is the mount your prized possession deserves. This top-quality carrier features a quick release with an integrated adjuster knob and a sliding wheel tray, which accepts tire sizes up to three inches. Plus, the SprocketRocket has an automotive finish sure to complement your vehicle. You'll also appreciate that the wheel strap is double-sided for use on either side of your car.
Thule's Prologue Bike Mount is ready to haul nearly any bike. It's compatible with bicycles featuring standard forks, including carbon forks and those with disc brakes. The mount's tray accommodates tires up to 2.6-inches wide. The Prologue fits round, aero and square crossbars, too. Plus, the fork mount features a dual-lock head that locks your rig to the mount and locks the mount to the rack.
Transporting tandems has never been easier than with Thule’s Tandem Bike Mount. Its unique pivoting fork mount allows fast, easy, one-person loading and it easily converts to carry single bikes. Boasting a corrosion-resistant aluminum tray, the Tandem Bike Mount includes tough nylon clamps and a stainless-steel skewer, too. It fits on square and round crossbars (sold separately).
The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
The Boa is a short-tray bike mount that fits a wider range of crossbar spreads (32 to 50 inches). It has a rotating wheel tray and a sleek fork block with Yakima's Locking Long-Throw Skewer, which clears most fork safety tabs.
Yakima's renowned ski carrier, the Powderhound, is easy to use and install. It's wide enough to carry up to four pairs of skis or two snowboards. Yakima's handy universal mounting hardware fits almost all crossbars for easy installation, and for easy use, a single button opens the Powderhound even with heavy gloves on. And, Yakima's SKS locks are included.
With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. Your car's rails are fully protected thanks to the integrated rubber lining. You also get maximum rack strength and a custom fit from the tooless, rubber-coated steel straps.
Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima's updated classic ski carrier, the Big Powderhound, is easy to use and install. It's wide enough to carry up to six pairs of skis or four snowboards. Yakima's handy universal mounting hardware fits almost all crossbars for easy installation, and for easy use, a single button opens the Powderhound even with heavy gloves on. And, Yakima's SKS locks are included.
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches or more
Let your friends enjoy the trip, because loading and unloading with the BoatLoader could not be easier. The telescoping load-assist arm lets you load your boat while protecting your vehicle and your boat, and retracts into your Yakima crossbar when not in use. - Telescoping boat load-assist arm retracts into your Yakima crossbar - Protects kayaks, canoes and your car from dings, scratches and dents - Corrosion-resistant - Fits Yakima round crossbars only - Extends 28 inches from end of bar
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
$129.00 - $139.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)
The FatCat EVO is Yakima's sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry four pairs of powder skis – up to 136mm at the tip – or two snowboards. FatCat EVO mounts tool-free on virtually any roof rack. SKS locks are built in for added security, and the silver anodized aluminum finish looks awesome on your roof. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super sleek setup (sold separately). Product Details - Easily carries four pair of skis – up to 136 mm wide at the tip - or two snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - Large button makes it easy to open with gloves or mittens on - Sleek mirror black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars – just add Yakima's SmarT-Slot Kit 2 (sold separately) Technical Specs - Weight: 10.00 lbs - Dimensions: L 30.50in x W 3.75in x H 5.25in
The FatCat EVO is Yakima's sleekest, quietest, and sweetest ski and snowboard mount. It is wide enough to carry six pairs of powder skis – up to 136mm at the tip – or four snowboards. FatCat EVO mounts tool-free on virtually any roof rack. The HangOver clamp attachment point makes it easier to reach your skis or boards. SKS locks are built in for added security.
$219.00 - $249.00
You'll have enough room for everyone with Yakima's FatCat on your roof. Featuring a low aerodynamic profile that reduces wind noise, it's wide enough to carry up to 6 pairs of skis or 4 snowboards. Yakima's handy universal mounting hardware fits almost all crossbars for easy installation, and for easy use, a single oversize button opens the FatCat so you can do it even with heavy gloves on. And, Yakima's SKS locks are included so your toys stay safe.
- Securely carries both road and mountain bikes QR and thru-axles - Includes interchangeable inserts for QR axles (9mm) and thru axles (12mm, 15x100, 15x110) - Fat Bike compatible with optional accessory (Sold separately) - No frame contact means no damage to carbon fiber and custom paint jobs - Optional SKS locking package secures mount to vehicle, bike to mount (sold separately) - 1 bike, 40lbs capacity
The FrontLoader is one of Yakima's most versatile upright mount roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It easily handles wheel sizes from 20 inches, to 700c road wheels, to large 29er mountain bike tires. Even if your bike has a unique frame design, there will be no problems carrying it because the FrontLoader holds the wheels and not the frame. Plus, it won't scratch your paint!
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Secure, sleek, and simple to use, the HighRoad is Yakima’s newest premium upright bike mount. The adjustment-free hoop, with its TorqueRight tightening knob, loads a variety of bikes quickly and easily. The HighRoad secures the bike by the wheels for ultimate bike protection and the low-profile design minimizes hatch interference. Optional SKS Locks (2) can be added to secure your bike and the mount to your vehicle. - New wheel hoop fits 26” to 29” wheels and tires from 23mm to 3.25” with no adjustment needed - New integrated TorqueRight knob quickly and easily secures the bike with precision - Requires no wheel removal and makes no contact with the bike frame - a great option for carbon fiber bikes and custom paint jobs - Sleek, low profile tray minimizes hatch interference - Tool-free, universal mounting hardware fits most roof racks - Add your own bike lock to the integrated lock loop for additional bike security when your vehicle is parked - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit (sold separately) - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately) TECHNICAL SPECS - Weight: 24.00 lbs - Dimensions: L 20.00” x W 20.00” x H 5.00”
Yakima's new premium fork mount, the low-profile HighSpeed, is streamlined, strong, and versatile. It easily transports mountain, road, and fat-tire bikes and fits both quick release and thru axles. Bikes are secured using the new and easy-to-use TorqueRight knob for a precise and stronghold. The sleek and stylish HighSpeed tray is designed for maximum hatch clearance. Optional SKS Locks (2) can be added to secure your bike and the mount to your vehicle. - Securely carries a variety of bikes including road, mountain and up to 5” fat-tire bikes. - Seamlessly carries both quick release (9 mm) and thru axle bikes (12 mm, 15 mm, 20 mm). - New TorqueRight knob quickly and easily secures the bike with precision. - Sleek, low profile tray minimizes hatch interference and accomodates tires up to 5” wide. - Tool-free, universal mounting hardware fits most roof racks - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit (sold separately). - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately). - Carry quick release 9 x 135 mm fat bike with the Optional Fat Bike Adapter Kit(sold separately). TECHNICAL SPECS - Weight: 20.00 lbs - Dimensions: L 22.00” x W 22.00” x H 5.00”
Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24 inches or more
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
$48.00 - $96.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
The LoadWarrior is the perfect accessory to boost the carrying capacity of your Yakima roof rack, plus it fits many other racks, too. Ingeniously, bike mounts attach directly to the basket to make carrying bikes easy, too. This cargo carrier is big enough to handle all your gear. The LoadWarrior even comes with a custom fairing that cuts wind drag and noise.
Got a Texas-sized SUV equipped with Yakima's LoadWarrior rooftop carrier? Then you may need Yakima's LoadWarrior Extension. It's constructed of heavy-duty, weather-resistant steel and it adds 18 inches and 40% more carrying capacity to Yakima's LoadWarrior rooftop basket (sold separately).
Page 1 of 4 Next page